Chiayo SMART300 Instrukcja Użytkownika Pobierz pdf (Strona 5)

ISO 9001｜ISO 14001｜OHSAS 18001

-4-

Recharge the battery before first use

After unpacking the unit for the first time, please recharge the unit for about 4~5 hours before

operation. This is absolutely necessary as the built-in rechargeable battery might have been

discharged naturally due to long shipment and storage time, even though it had been fully charged in

the factory prior to shipment.

To charge the battery, just plug in the DC end of the switch mode power supply into the DC IN of the

unit and charging will start automatically. During the charging process, the charging indicator LED

will flash GREEN. When this LED turns GREEN, this battery is then fully charged.

Operating procedures

To operate this portable sound unit, switch on the main POWER switch, which will be GREEN.

If it turns RED, its battery power might be too low and recharging is necessary. The main power

switch does not switch on the wireless microphone and USB/SD digital player as each of them

has an individual Power / Volume control.

Operating the built-in wireless microphone

On the control panel, there is one power/volume control knob for the built-in wireless receiver,

which is indicated by WR.

To use the wireless microphone, first switch on the main power, then switch on the WR

power/volume control, and its nearby led will glow. Turn on its matched transmitter. Adjust the

volume till the amplified sound could be heard when speaking to the transmitter.

Operating the wired microphone

There is a MIC IN jack with dedicated volume control for this portable sound unit. To use a

wired microphone, just plug the end with a phone jack plug into MIC IN. Switch on the

Power/volume control knob (PWR/MIC) and rotate it to adjust the volume.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Chiayo SMART300 Instrukcja Użytkownika Strona 5